Polaris 600 RMK Shift Uživatelský manuál stáhnout pdf (Strana 100)

MAINTENANCE

Clutch System

n Drive Belt Deflection

Measure belt deflection with both

clutches at rest and in their full

neutral position.

Place a straight edge on the belt

and apply downward pressure

while measuring at point A. This

measurement should be 1 1/4"

(3.2 cm).

Drive Belt Adjustment

1. Install the L-wrench into the open threaded hole in the outer sheave

of the clutch (see page 96). Turn the wrench clockwise slightly to

remove pressure from the sheaves.

2. Loosen the 7/16" jam nut.

3. Using a 1/8" Allen wrench, turn the set screw inward (clockwise) to

increase the distance between the sheaves or outward

(counterclockwise) to decrease the distance.

4. Tighten the jam nut. Store the L-wrench in the tool kit.

To r q u e S t o p

Periodically check torque stop clear-

ance. With clutches in proper align-

ment, measure rear torque stop

clearance from the engine case. Rear

torque stop clearance should be .010"-

.030" (.25-.75mm). Adjust if neces-

sary. Secure the nut.

Straight

Edge

Measure

.010"-.030"

(.25-.75 mm)

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 132 133

Žádné komentáře

Polaris 600 RMK Shift Uživatelský manuál Strana 100